About the Mitel SX 200 ML & EL Peripheral Node w PRI Support
Part # 9109-600-002
The SX-200 EL and the SX-200 ML system use the same rack mount
(RM) horizontal cabinet, the SX-200 ELx cabinet (PN 9109-600-002-NA),
for the control cabinet and for the peripheral cabinet. The horizontal
cabinet can be mounted in a standard 19" rack, or they can
be stacked. The cabinet is plastic and plexiglass. The door on the
cabinet allows the system administrator to see the system status
at a glance. The control cabinet and the peripheral bays are linked
by fiber or copper cables.
Located on the rear of the SX-200 ELx cabinet are four 25 pin connectors
(J1-J4 for the peripheral interface cards), three RJ-45 connectors
(J5-J6 for T1 trucks, and J7 for a system fail transfer control
port), a printer port, a grounding connector, a maintenance port,
and two RS-232 connectors (J10 and J11 for the PRI maintenance).
|